← Journal

Process

How shilajit is purified and sun-dried

Raw shilajit comes off the mountain full of stone and grit. Here is the traditional way it is dissolved, filtered and dried in the sun into a clean resin.

How shilajit is purified and sun-dried

Raw shilajit comes off the mountain mixed with stone, sand, soil and plant debris. It is not something you would eat straight from the rock, and the classical texts never suggested you should. Purification is the step that turns a mountain exudate into a clean resin, and how it is done says a lot about the quality of what ends up in the jar.

Why it has to be cleaned

Shilajit forms in rock crevices, so the raw material carries whatever the rock carries: grit, sand, fibre, and naturally occurring minerals, including traces of heavy metals such as lead. The Ayurvedic tradition handled this with shodhana, a purification step that the Charaka Samhita treats as essential before use.

The traditional sequence

Classical recipes differ in their details, but they share one sequence.

  1. Dissolve. The raw material is broken up and soaked in water. Shilajit dissolves in water; rock and grit do not.
  2. Filter. The dark liquid is strained, often through cloth, to remove stone, sand and fibre.
  3. Settle and decant. It is left to stand so fine sediment sinks, then the clear liquid is poured off.
  4. Concentrate. The liquid is reduced slowly. Some texts add herbal decoctions such as triphala at this stage; others use water alone.
  5. Dry. The concentrate is dried down to a resin.

The water matters at every step: whatever is in it ends up in the resin.

Surya tapi: drying in the sun

The texts describe two ways to dry the cleaned liquid: surya tapi, using the heat of the sun, and agni tapi, using fire.

Sun drying is the slower, traditional route. One documented method sets the warm concentrate out in full summer sun. Each day, the rich layer that rises to the surface is skimmed off and spread thin to dry, and the vessel is covered and brought inside every evening to keep out dust and insects. In that study the process took eight days in summer. Older texts describe sun processing over weeks, and one, the Sharangdhar Samhita, over about two months.

Fire is faster. Sun drying takes longer and is the method most closely tied to tradition, which is why it is worth asking any seller how their resin was dried.

What purification cannot tell you

A careful process is a good start, but it is not proof. Purification can lower contaminants; it cannot tell you how low they ended up. Only a laboratory can measure lead, arsenic, cadmium and mercury, count microbes, or put a number on fulvic acid. India's Ayurvedic Pharmacopoeia has no standard identification monograph for shilajit, which leaves a lab report as the real check.

Ours

Our resin is wild-harvested in the high peaks of Nepal, purified and sun-dried, then tested by Eurofins for metals, microbes and fulvic acid. We publish every result on the report, not just the flattering ones.

Shop Nepalese shilajit resin in 30g or 60g jars, or save with a bundle.

Keep reading

Sources

The range

Read about it, then try it.

Sea moss in two formats, Nepalese shilajit resin and organic turkesterone.

View all